Timer Function - Stramatel MULTI-TOP Bedienungsanleitung

TIMER FUNCTION

Set-up
Plug in the power supply on the side of the Multi-Top.
Use only the power supply supplied by STRAMATEL.
Press the ON/OFF key until the console displays the welcome screen.
Programming
Select the "Timer Function" mode with key 13.
The console screen displays the stored configuration during a few seconds: mode of display of
the timer (count-up or count-down), length of time (in count-down mode).
Press key 18 to view the data on the console screen longer.
Change the configuration with key 0 or play with the stored configuration with key 9.
To change configuration: answer the various questions displayed on the console screen with
keys 0 to 9, and enter your answer with key 23.
During programming, it is always possible to come back to the previous programming with key
13.
Timer
Start or stop the timer with key 18.
In count-down mode: the horn sounds automatically at the end of the programmed time. The
timer continues to count on the console screen.
Correction of the timer:

stop the timer with key 18, then enter in timer correction mode by pressing keys 16
and 18 simultaneously.

shorten the game time with key 16 or increase it with key 20. Enter with key 18.
Horn
Sound the horn manually with key 19.
End of the timing
Load a similar type of timer configuration by pressing key 28.
Load a different type of timer configuration: press key 28, then enter in programming mode
with key 27.
ZI de Bel Air 44850 LE CELLIER FRANCE
UA452MTOPS_A - Multi-top on mains.docx
stramatel@stramatel.com Tél. +33 (0)2 40 25 46 90
Page 34