Laser Safety; Class 1 Laser Product - Denver TVD-2118 Bedienungsanleitung

CAUTION
Never replace with any components inside your set, or any other adjustment controls not mentioned in this manual. All television
receivers are high voltage instruments. Your PICTURE TUBE is highly evacuated. If broken, glass fragments will be violently
expelled. Scratching, shipping or undue pressure is dangerous and should be avoided. When you dust or wipe the PICTURE TUBE
FACE or CABINET, the power plug should be pulled out from the socket , then wipe the receiver with a dry soft cloth. All "inside
work" on your receiver should be performed only by Professional Service Personnel.
DANGER
Invisible laser radiation when open
and interlock failed or defeated.
avoid direct exposure to laser beam.
Manufactured under license from Dolby Laboratories "Dolby" , "Pro Logic" and the double-D
symbol are trademarks of Dolby Laboratories. Confidential unpublished works.
Dolby Laboratories,lnc.All rights reserved.

LASER SAFETY

This unit employs an optical laser beam system in the CD mechanism,
designed with built in safeguards. Do not attempt to disassemble, refer to
qualified service personnel.
Exposure to this invisible laser light light beam may be harmful to the
human eye.
THIS IS A CLASS-1 LASER PRODUCT. USE OF
CONTROLS, OR ADJUSTMENTS OR PROCEDURES
OTHER THAN THOSE SPECIFIED HEREIN, MAY
RESULT IN HAZARDOUS LASER LIGHT BEAM
CLASS 1
LASER PRODUCT
3
C
1992-1997