Program Mode - Denver TVD-2118 Bedienungsanleitung

Program Mode

This function is applicable for DVDand CD audio. User can assign the playback sequence according to his/her preference.
For CD audio, user can assign the track sequence while for DVD disc, user can assign both the Title and Chapter sequence.
CD
1. Press the PROGRAM Key. The Program Sequence table will be shown on the screen.
2. Enter the track numbers according to the user preference through the Number keys (0-9).
3. After assigning the playback sequence, move the green highlight cursor to the
START option by using the Navigation Arrows.
Press OK button on the remote controller to confirm.
To remove the program :
1. Press the PROGRAM Key to invoke the Program Menu.
2. Move the green highlight cursor to the EXIT option by using the Navigation Arrows.
3. Press OK button to confirm, you will exit the PROGRAM menu.
DVD
1. Press the PROGRAM Key. The Program Sequence table will be shown on the screen.
2. Enter the Title number with the Number keys (0-9) on the remote controller.
3. Enter the Chapter number of the Title selected in the last step.
4. Repeat step 2 and 3 to input the sequence.
5. After assigning the playback sequence, move the highlight cursor to the START option
by using the Navigation Arrows. Press OK on the remote controller to confirm.
Note : The Program can be removed in the same ways as CD audio.
19
Program: Track(01-08)
EXIT NEXT
Program: Track(01-08)
EXIT START NEXT
Program: TT(02)/CH(--)
TT: CH TT: CH
TT: CH TT: CH
TT: CH TT: CH
TT: CH TT: CH
TT: CH TT: CH
EXIT NEXT
Program: TT(02)/CH(--)
TT:01 CH TT: CH
TT: CH TT: CH
TT: CH TT: CH
TT: CH TT: CH
TT: CH TT: CH
EXIT NEXT
Program:TT(02)/CH(--)
TT:01 CH:02 TT: CH
TT: CH TT: CH
TT: CH TT: CH
TT: CH TT: CH
TT: CH
TT: CH
EXIT START NEXT
Program:TT(02)/CH(--)
TT:01 CH:02 TT: CH
TT:01 CH:01 TT: CH
TT:01 CH:01 TT: CH
TT: CH TT: CH
TT: CH TT: CH
EXIT START NEXT
Program:TT(02)/CH(--)
TT:01 CH:02 TT: CH
TT:01 CH:01 TT: CH
TT:01 CH:01 TT: CH
TT: CH TT: CH
TT: CH TT: CH
EXIT START NEXT