Dvd Operation; Play Discs; Pause Mode; Dvd Menu Play - Denver TVD-2118 Bedienungsanleitung

DVD OPERATIONS

Play Discs

1. Press the OPEN/CLOSE Button (
The label side should be facing upwards. For a Double-sided DVD Disc, put the disc with label A/1 up.
2. Press the OPEN/CLOSE (
3. The Disc will be played automatically.
If it is a DVD disc, it will show the Menu/Title Page on the screen.
If it is a CD, it will play the first track directly.
4. Press the STOP Button (
playback by pressing the OK button (on the front panel)or the OK button (on the remote controller) and it will start at
the location where you have pressed stopped (Resume Play).
5. Press the STOP Button twice to have the Disc really stopped.

Pause Mode

This function is applicable for DVD and CD audio.
For DVD , the picture will become static.
For CD audio, it will become silent.
1. Press the PLAY/PAUSE (
2. Press the OK Button or PLAY/PAUSE Button again will continue to Play mode .
OSD Language
There are 7 OSD languages embedded in the DVD Player : English, German , Danish , Swedish, Spanish,Portuguese,Italian.
1. Press the SETUP button on the remote controller to enter the setup menu main page.
2. Press the Navigation Arrows(
3. Go to the OSD LANG option and use the Navigation Arrows to do the selection.
4. Press OK button to confirm.
5. Press SETUP again to resume the Setup menu.

DVD Menu Play

The DVD Menu Play function is only applicable for DVD movie.User can get the Casting information, Production History, Movie
Introduction etc. directly through this function.
1. Press the DVD MENU Button on the remote controller to enter the Root Menu.
2. Use the Navigation Arrows (
to do the selection.
3. Press OK button to confirm the selection.

Select with Number Button (0 - 9)

When using the Number Buttons as input, user can directly input the numbers, if want to enter two digits.
For example, to input the number '13' , user has to press ' '1 ' and ' 3' .
During a DVD movie playback, input through the Number Buttons will select the Chapter in the current title.
When playing audio CD, Number Key press will command the player to access the track indicated.

Audio Mode

This function is applicable for DVD and CD audio but with different effects.
For a DVD disc, pressing the AUDIO Button will change the language of playback.
Fast Play
This function is applicable for DVD and CD audio but with different effects. The FAST FORWARD (
and FAST BACKWARD (
For DVD , there are 4 different levels of speed (2x, 4x, 8x, 16x). Every successive key press will increment the speed of quick play.
Note : Press PLAY Button at any stage will resume to normal speed.
For CD audio, the FF/FR will perform quick rolling on the music output. However, once the FF/FR key press is released, the
Playback will resume to normal speed.

Slow Play

The Slow Forward is applicable for DVD, There are 4 steps of slow motion speed, 1/2,1/4, 1/8, 1/16. Successive key presses will
decrement the playback speed.
Note : Press Play Key to switch back to normal playback speed.

Repeat Mode

This function is applicable for DVD and CD audio but with different effects.
For DVD disc playback, user can choose to repeat the current chapter or the current title.
Subsequent key press of the REPEAT key can change between these two options.
For CD, user can choose to repeat the current track or the whole disc (Repeat All).
Subsequent key press of the REPEAT key can change between these two options.
) on the front panel and load the Disc on the tray.
) button again to close the tray and the disc will be loaded.
) if you want to stop the Disc playback You can continue
) Button will cause the player to enter Pause mode.
) to choose General Setup Page
) or input the item index through the Number keys (0-9)
) key are used to achieve fast play function.
17
) key