Firmware Update - Xetron DMG-10X Bedienungsanleitung

The device defaults to 18 commonly used refrigerants, and customized refrigerant
data can be added to the device through the APP. The specific operation steps are as
follows:
Delete equipment refrigerant:
1.Connect the device to the APP, enter the Dashboard interface, and click the
refrigerant icon in the upper right corner to enter the Refrigerant interface.
2.Select the refrigerant to be deleted, click the delete icon, and click the update icon
in the upper right corner after deleting.
3.The device update is complete.
Add refrigerant:
1.Connect the device to the APP, enter the Dashboard interface, and click the
refrigerant icon in the upper right corner to enter the Refrigerant interface.
2.Click All , select the refrigerant to be added, and click the favorite icon.
3.After selecting, click Favorite, and then click the update icon.
4.The device update is complete.

4.6 Firmware Update