9. MAINTENANCE
There are no components located inside the product you need to
maintain. Never open/dismantle the product.
-
If you have questions which remain unanswered by these operating
instructions, contact our technical support service or other techni-
cal personnel.
10. CLEANING
Before cleaning the product must be disconnected from mains so-
cket and all electrical loads.
Before cleaning the product, it must be disconnected from all other
connected products.
Only use dry and soft cloth to clear the housing of the Product.
Do not use abrasive or solvents.
Do not use any aggressive cleaning agents, rubbing alcohol or other
chemical solutions as they can cause damage to the housing and
malfunctioning.
apply too much pressure to the housing as this may cause scratch
marks.
You can easily remove dust using a long-haired, soft and clean
brush.
-14-