Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
8. FREQUENTLY ASKED QUESTIONS
NO CONNECTION
If the PureLink CSW030 is not able to make a stable connection for
80 seconds during start-up, the PureLink CSW030 Receiver is pro-
bably outside the range of the PureLink CSW030 Transmitter. Place
them closer to each other (a minimum distance of 1 meters apart)
and check whether the connection can be made.
NO SIGNAL AVAILABLE FROM CHOSEN SOURCE
The PureLink CSW030 does not recognize an input signal on the
selected SOURCE.
• Check whether the correct HDMI source has been selected and
whether this is ON.
• Check whether the HDMI cable between the PureLink CSW030
Transmitter and HD device is connected properly.
• Replace the HDMI cable to the HD device.
VIDEO RESOLUTION IS NOT SUPPORTED
The video resolution that is set on your HD device is not recognized
by the PureLink CSW030 Transmitter.
• Connect the HD device directly to the HDTV or projector and
check whether the set video resolution corresponds to the reso-
lutions that are supported.
-12-
Werbung
Inhaltsverzeichnis
