Application - PureLink CSW030 Bedienungsanleitung

7. APPLICATION

1. After plugging the power adapter into the wall outlet, turn on the
2.
conds to complete the transmission. Connect the transmitter to
the HDMI port of the computer, laptop, or other media source. Af-
to complete the connection, and then press the main button on
the transmitter to mirror the content from your device.
3. When the connection between the transmitter and receiver is
completed, both LEDs will light up continuously.
Note: Place the transmitter and receiver at least 1 meter apart to
ensure a good connection.
SWITCH YOUR EQUIPMENT ON
1. Switch the HDTV or HD Projector ON and select the HDMI input on
this device to which you have connected the PureLink CSW030
Receiver.
2. Switch the HD device or Laptop to which the PureLink CSW030
transmitter is connected ON.
3. If there is a good connection between your HD device and the
HDTV (or HD Projector), both LEDs on the receiver will light up
constantly.
-11-
-
ENGLISH