41. Telescopic antenna
42. AC outlet
CONTENT OF DELIVERY
➢ Main unit
➢ AC power cable
POWER SUPPLY
➢ Ensure that the voltage is the same as that indicated on the main unit identification plate.
➢ Connect the supplied AC power cable to a properly installed safety power socket and the
plug of the cable into the AC socket at the back side of the unit.
This device can be plugged into the power cord or installed with dry batteries
Be sure to remove the dry battery when using the power cord.
If there are dry batteries in the host, connect the power plug to the socket, and it will switch to
household power. When using dry batteries, please unplug the power plug from the device.
BATTERY
1. Press and hold the battery door buckle, push and pull it backwards according to the direction
indicated by the arrow on the battery door, open the battery door, insert 8 (UM-1) batteries (not
supplied) correctly according to the direction shown in the battery room, and close the battery
door.
2. When installing the battery cover, please align the hole on the right first, and then press down
until you hear the click sound.
43. Battery door
44. Power switch button
INSTALLATION
➢
Instruction Manual
2
SCD1980 / English Instruction Manual