AIRFORCE Centrale on board B4O 83 Montage- Und Gebrauchsanweisungen Seite 59

OPERATION OF THE HOB
Using the cooking timer
The cooking timer is connected to a cooking zone. After the set time has elapsed, the cooking zone
will switch off automatically.
The hob is switched on and for at least one cooking zone a power level has been set.
1. Touch the desired cooking zone key.
2. Touch the timer symbol.
The timer symbol of the active cooking timer lights up brightly.

The timer display shows '0.00' .

3. Use the '+' or '-' key to set the desired time (from 1 minute to 9 hours and 59 minutes).
The left position of the timer display shows the hours, the other positions the minutes.

When the time is set, it will begin to countdown and the timer symbol flashes slowly.

The timer display will show the remaining time.

The last 10 minutes will be displayed in minutes and seconds.

The selected cooking zone will switch off automatically once the set time has elapsed.

The timer flashes and the alarm beeps after the set time has passed.

4. Touch the timer symbol to stop the alarm.
The alarm stops automatically after 2 minutes.

All the cooking zones can have a cooking timer that has been set. The display will always show the
time of the cooking zone with the shortest time remaining.
Changing the pre-set cooking time
The cooking time can be changed anytime during the operation.
1. Touch the relevant cooking zone key.
2. Touch the timer symbol.
3. Use the '+' or '-' key to change the time.
FUNZIONAMENTO OPERATION
59 59
GB I