Clock Mode; To Set The Real-Time Clock; Time Zone - SBC DIGISPORT SE 119 DOT MATRIX Bedienungsanleitung

Screen Display
Clock / Alarm / User Profile Main
Mode
Timer / Stopwatch - Main Mode
Timer / Stopwatch - Setting Mode
Memory Main Mode
The real-time clock is the default display for SE 119.

To set the real-time clock

1. Press MODE to switch to Clock Mode.
2. Press and hold SET until the first setting flashes.
3. Press ST/SP/+ or MEM/- to change the setting.
4. Press SET to confirm the setting and move on to the next one.
5. Repeat step 3 and 4 to change other settings for this mode.
The setting sequence is 12 / 24 hour clock format, hour, minute, second, date format, year,
month and date.
6. Press MODE to exit the setting mode at any time.
2

time zone

nd
To toggle between time zone 1 and 2, press ST/SP/+. Press and hold ST/SP/+ to change the time zone to T1 or T2
permanently. When you set the hour, minute, second, year, month and date in the Clock Setting Mode, you will be setting
the permanently selected T1 or T2 time.
Prompt Screen

CLOCK MODE

Hold to speed through the options.
9
Prompt Action
Enter Clock / Alarm / User Setting
Mode
Reset Timer / Stopwatch
Enter Timer / Stopwatch Setting Mode
Delete total calorie and fat burn or
individual memory