Tips For Optimal Use; Filters; G3 Filter; F6 Filter (Fine Dust Filter) - Brink Sonair F+ Bedienungsanleitung

3.5 Tips for optimal use

Make sure that the top of your Sonair is not obstructed by, for example,
curtains.
Replace the filter in your Sonair every 6 to 9 months or when the filter
message indicator appears.
4

FILTERS

Your Sonair can be fitted with two different types of filter. The sticker on the
filter shows what type of filter is installed in your Sonair. We recommend that
you replace the filter in your Sonair every 6 to 9 months or when the filter
message indicator appears. You can order the filters at your dealer. The old
filter can be disposed of with the household rubbish.

4.1 G3 filter

4.2 F6 fine dust particle filter
Your Sonair is standard fitted with a G3 filter. This filter
is used under normal dust load conditions. The G3 filter
captures 50-70% of the particles larger than 10 μm, such
as leaves, insects, and dust particles including hairs,
textile fibres, sand, pollen and spores.
The F6 fine dust particle fine filter is used when the
dust load is moderate to high. This filter captures 99%
of all dust particles larger than 10 μm and 95-99% of all
particles larger than 5 μm, including very fine dust such
as pollen, spores, cement dust and excreta of the house
dust mite.
NL
EN
DE
23