Product Overview; The Sonair - Brink Sonair F+ Bedienungsanleitung

NL 2

PRODUCT OVERVIEW

2.1 The Sonair

EN
DE
3
5
18
1
2
4
6
Operating buttons
1
The two operating buttons allow you to set
the ventilation rate manually. By pushing the
right button you can increase the fan speed.
By pushing the left button you can decrease
the fan speed and stop the motor.
Display
2
The display shows the ventilation rate and a
possible filter message indicator. See page
19 for more information about the display.
Outlet
3
The outlet holds the filter. The filtered air is
blown through the outlet into the room.
Filter
4
The outdoor and indoor air (only Sonair A+)
is cleaned by the filter before it is blown into
the room. See page 23 for more information
about filters and how to replace the filter.
Open/close/recirculation knob
5
The knob allows you to adjust the ratio of
outdoor and indoor air being blown through
the filter and into the room (only A+) or to
close off the air inlet completely (possible
with the Sonair F+ & A+). See page 22 for
more information about adjusting the ratio of
outdoor and indoor air.
Air inlet
6
The fan sucks outdoor air into the Sonair
through this opening.