External Audio Input (Aux-In) - N'oveen PR150 Benutzerhandbuch

Note: Disconnecting the USB memory or MicroSD card during playback can cause
damage to the media.
b. Bluetooth operation
1). Press the MODE button to switch to Bluetooth function and enter the search
mocde. When the search is completed, the device will emit a signal sound.
2). In Bluetooth mode, you can play music when connected to your phone. Press the
button to play/pause playback, pressbutton to move to the next track, press 
to move to previous track.
3). Long press the PLAY button to disconnect the current connection.
c. Set the function switch to FM position to listen to the FM band:
1). Set the volume to a moderate position and use the tuning knob to find a radio
station. You can listen to any radio programme within the 88-108 MHZ range.
2). When receiving FM programmes, stretch the telescopic antenna to get a better
reception.
d. Set the function switch to AM position to listen to the AM band:
1). Set the volume to a moderate position, and use the tuning knob to find a radio
station. You can listen to any radio programme in the 530-1600 kHz range.
2). If the received radio signal is not good, change the direction of the device to get a
better reception.

EXTERNAL AUDIO INPUT (AUX-IN)

1. Set the function switch to BT/AUX.
2. Connect the external audio cable to the AUX-IN connector.
3. When a USB memory stick or MicroSD card is inserted, the AUX input will be
played first when the cable is connected to the AUX-IN socket.
CHARGING
Insert the 5V DC charging cable plug (supplied) into the charging socket, the red
indicator will light up. When the battery is fully charged, green indicator will light up.
30