N'oveen PR150 Benutzerhandbuch Seite 29

3. No sound, possible causes:
1) No power supply.
2) Speaker damaged, contact service.
4. If you are not using the radio for a long time, remove the batteries to prevent
leakage, which can damage the device
PR950/951 DESCRIPTION
1 Previous track / rewind
2. Playback / pause
3. Next track / fast forward
4. Mode button
5. Fisplay
6. Radio scale
7. Function switch
8. Power switch / volume knob
9. Tuning knob
10. Headphone jack
11. AUX-IN socket
12. MicroSD card slot
13. USB socket
14. Charging socket
15. FM antenna
OPERATION
After turning on the power, the following operations can be performed:
a. Set the function switch to BT/AUX for USB/MicroSD playback:
1). Insert the USB/MicroSD to play the songs directly. During playback press the
play/pause button
once to pause playback, press the button again to resume.
2) During playback, press the "previous track" button to go to the previous song;
press the "next song" button to go to the next song. Long press of these two buttons
allows for fast forward and rewind.
3). When there is a USB and MicroSD card in the device at the same time, press
the MODE button to switch between USB/MicroSD/BT.
4). Turn off the power before disconnecting the USB memory or MicroSD card.
29