Preset Tuning; Setting The Clock - N'oveen PR150 Benutzerhandbuch

5) Adjust the antenna to receive well signal.
6) To turn off the unit press the power button.

PRESET TUNING

You can store memory stations for each of the FM, AM, SW-1/SW-2 waveband
range by following these steps:
1) First tune in to your desired station.
2) Press and hold M button and the MEMO will flash on the display.
3) Press M button or TUNING + or TUNING - button to select the preset station
number.
4) Press and hold M button to confirm and the MEMO will stop flashing.
Note: It will quit the station storage mode in about 7 seconds. Once the MEMO
disappears from the display, you have to repeat steps 1 to 3 to store more preset
stations.

SETTING THE CLOCK

Press WAKE button to select OFF
1) Press TIME button, the time will start flashing on the display.
2) Press TUNING + button to select hour.
3) Press TUNING - button to select minutes.
4) Press the TIME button again to confirm the time and the time will stop flashing
Note: - It will auto confirm in about 7 seconds. Repeat steps 1 to 3 to set the
clock. - The unit must be off in order to set the clock and the display the
time.
25