N'oveen PR150 Benutzerhandbuch Seite 23

12. SPEAKER
13. AC IN SOCKET
14. HANDLE
15. FM ANTENNA
16. POWER ON/OFF
POWER SOURCE
Battery operation
1.) Open the battery door
2.) Insert 2 "D" size ( UM-1, LR20 or equivalent) batteries into the battery
compartment,
making sure that the batteries are installed with the proper polarities (+ and -).
AC Supply
1) Before use, check the rated voltage of your local voltage. And then slide the
voltage
switch to match your local voltage.
Note: The voltage switch is on the bottom of the unit.
1) Make sure the Voltage Selector is set to the correct position. Connect the AC
cord to the AC IN socket and the wall socket. Unit is ready to use.
2) To turn the unit off completely, pull the AC cord from the wall socket and
disconnect from the AC IN socket.
To prevent possible damage:
- Load new batteries with their polarities ( + / -) aligned correctly.
- Do not apply heat to batteries, or internal short - circuit may occur.
23