N'oveen PR150 Benutzerhandbuch Seite 18

1. Turn the volume control towards the large speaker to turn on the radio and
increase the volume. Turning towards the small speaker decreases the volume until
the radio turns off.
2. Select desired radio band using the switch.
3. Set the desired station by turning the tuning knob.
NOTE
1. Avoid dropping the device.
2. Avoid exposure to extreme temperatures, direct sunlight and moisture.
3. For celaning use a soft cloth moistened with a mild detergent.
4. The batteries must be replaced in case of fluctuations or sound distortion.
5. When the device is not going to be used for a long time, remove the batteries in
order to
avoid damage caused by leakage and corrosion.
TELESCOPIC ANTENNA:
1. Pull out the telescopic antenna for optimal FM radio reception.
2. The device is equipped with a built-in AM ferrite antenna.
Note: The built-in antenna is directional, so reception of the AM band can be
improved by turning the radio.
WARNING:
To prevent the risk of fire or electric shock, do not expose to rain or moisture. Do not
remove the cover of the radio, the parts inside the device cannot be operated by
user.
The servicing must be carried out by an authorised service centre.
PR450 DESCRIPTION
1. TELESCOPIC ANTENNA
2. TUNING KNOB
3. FUNCTION SWITCH
4. VOLUME CONTROL / ON / OFF
5. RADIO SCALE
18