Linea 2000 DOMO DO7296S Gebrauchsanleitung Seite 63

· When the battery is almost empty, or when the appliance has finished its programme, the vacuum
cleaner will automatically return to the charging station if one has been installed. If no charging
station is installed, the vacuum cleaner will enter standby mode.
· You can also choose to charge the appliance sooner by pressing the HOME button on the remote
control.
· When charging, the control button indicator light on the appliance will flash. Once the vacuum cleaner
is fully charged, the light will switch off.
CHARGING WITHOUT CHARGING STATION
1. Plug the adapter into a socket and insert the adapter output
into the device.
2. When charging, the control button indicator light on the
appliance will flash. Once the vacuum cleaner is fully charged,
the light will switch off.
PLEASE NOTE
· Ensure that the on/off switch on the side of the appliance is on at all times, otherwise the appliance
will not be able to charge.
· Ensure the adapter is plugged into a socket and connected to the charging station, otherwise the
vacuum cleaner will not be able to find the charging station.
USE
Turn the machine on with the on switch on the side of the appliance prior to use or
charging.
STANDBY/SLEEP MODE/OFF
Standby
The machine is in standby mode when the on switch is on and the machine is in idle state, ready to be
used immediately.
Sleep mode
The machine automatically goes into sleep mode after being in standby mode for 10 minutes. When the
machine is in sleep mode, you must first activate it before you can start the machine. Do this by pressing
the control button on the appliance or the ON/OFF button on the remote control.
Off
You can turn off the machine completely by switching off the on switch on the side of the device while in
standby mode.
USE WITHOUT REMOTE CONTROL
· Press the control button for automatic cleaning. The vacuum cleaner will plot its own path to vacuum
the entire area, taking walls, obstacles and stairs into account.
· When the machine is finished vacuuming, it will automatically return to the charging station. If no
charging station is installed, the vacuum cleaner enters standby mode.
· It is also possible to allow the machine itself to stop cleaning. To do this, press the control button. Turn
the device off with the on switch on the side of the machine.
www.domo-elektro.be
63
DO7296S