Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Install the steering wheel
1. Flip the car onto its wheels. Within the seat,plug the connectors for
the left and right drive motors into the designated terminals on the
circuit board.
2. Insert the connector from the battery into the designated terminal on
the circuit board.
NOTE: Make sure the connector is oriented correctly to fit into the
terminal.
Install Side armrest
14
1. Insert the 2pcs side armrests into
the car body.
Install seat
1. Snap the seat into the car body and secure it with 2pcs 4*12 flat
head screws.
Installation of gear switches
1. First check if the gear switch connection cable is connected,the left
and right side gear switches are fixed with 2pcs black 4*10 round
head screws respectively.
Note: The gear switch is oriented as shown in the picture.
15
Werbung
Inhaltsverzeichnis
