Installation And Use - VARON NT-1 Benutzerhandbuch

Installation and use

1. Please check the package when receiving the package
Before installing and using the product, please firstly check whether the
appearance of the product is intact and whether the variety and quantity of
accessories are consistent with the packing list in the user manual. If there is any
defect, please contact the seller or manufacturer in time.
2. Outline diagram
Figure 1 –
Figure 2 –
05 English
Operation panel
Oxygen outlet
Power connector
Radiator grille
Right side view
Note： It is normal for
hot air to be discharged
from the heat dissipation
vent. Make sure that the
air space at the air inlet
and outlet is smooth.
left side view
Schematic diagram of internal battery placement
Figure 3 –
3. Introduction to operation panel function
Figure 4 – Operation panel diagram
1. Button function introduction
▶ Power button: Start and stop keys. Short press the button, the
machine will start to work; long press the button for 3 seconds during work,
the machine will stop working;
▶ Grade：Adjust output oxygenflow；
▶ Time：Setting device using time, adjustable from 0~240 minutes
2. Display content introduction
▶ Accumulated hours: display how long the device has been working
(unit: hour)
Installation and use
Note: The user cannot
disassemble without
p e r m i s s i o n ， i f
necessary， It needs to
be returned to the
dealer or professional
.
for processing
Attention: User is not
allowed to open this
.
part
English
06