Sushi Bikes MAKI 3.0 STONE Bedienungsanleitung Seite 71

4 . 3 P R O B L E M S O L V I N G
SYSTEM DOES NOT RESPOND
Check the plug connections regularly for heavy soiling, moisture and a tight connection. Although the cable con-
nections are water-protected and difficult to disconnect, it can still happen that the connections come loose. You
can find such connectors on the chain stay, at the display cable and under the battery holder. When plugging
them together, pay attention to the arrows on the connectors.
ERROR MESSAGE FROM THE DISPLAY
Turn off the display and remove the battery from the battery holder for a few seconds. Insert the battery again.
Then test whether the error message appears again when restarting. If this does not solve the problem, please
contact us.
MAINTAINING AND BLEEDING HYDRAULIC DISC BRAKES
Check your brakes regularly. If they feel soft or the pressure point starts to drift, it's time to have your brakes ser-
viced. There are several reasons why the braking power of your hydraulic disc brakes may decrease:
- Brake pads are worn - you should replace them.
- Brake pads or discs are dirty - you should clean them and replace them if necessary.
- There is air in the brake system - you should bleed the brake. Visit a specialist workshop or service partner.
7 1