ofinto Elevate Bedienungsanleitung Seite 25

Because the ofinto Elevate office desk is height adjusta-
ble, it is essential to have free space/safety clearances
in both the height adjustment zone and surrounding the
desk. This is to ensure that adjusting the desk height does
not damage surrounding objects or the desk itself, or
cause injury to the user or others. Before every operation,
ensure that there is an all-round safety clearance of at
least 25mm between the table top and other objects. Be-
cause of the risk of injury or damage, do not position the
ofinto Elevate office desk flush with similar or other tables.
The ofinto Elevate has automatic collision protection.
Under certain conditions, the collision protection may not
function properly. That is, if the collision occurs during
initialization, during the first second of operation or over
too long a period of time, i.e. with a soft or moving object.
Before changing the desk height, always check that the
height adjustment zone is unobstructed both above and
below the table top. Otherwise, the desk and the objects
standing in the way suffer damage. When operating the
height adjustment function, make sure that no persons
are within the height adjustment range, otherwise injuries
such as crushing may occur.
Check that cable connections to electronic devices on
the desk are of sufficient length. Do not connect cables
to devices on other tables or shelves. Cables must not be
E
pinched or crimped.
25