Controls And Displays; System Requirements - Hama KEY4ALL X510 Bedienungsanleitung

G Operating instruction

Controls and Displays

A Display bar
1. Status LED – Bluetooth
charge
B Controls
2.[OFF/ON] switch
3. [CONNECT] button
4. Battery compartment
Thank you for choosing a Hama product.
Take your time and read the following instructions
and information completely. Please keep these
instructions in a safe place for future reference. If
you sell the device, please pass these operating
instructions on to the new owner.
1. Explanation of Warning Symbols and Notes
Warning
This symbol is used to indicate safety instructions
or to draw your attention to specific hazards
and risks.
Note
This symbol is used to indicate additional
information or important notes.
2. Package Contents
• 'KEY4ALL X510' Bluetooth
• these operating instructions
• 2 x 1.5V (AAA) batteries
3. Safety Notes
• The product is intended for private, non-
commercial use only.
• Protect the product from dirt, moisture and
overheating, and only use it in a dry environment.
• Disconnect the product from the network using the
power button – if this is not available, unplug the
power cord from the socket.
• Do not use the product in moist environments and
avoid splashes.
• Do not drop the product and do not expose it to
any major shocks.
• Dispose of packaging material immediately
according to locally applicable regulations.
• Do not modify the product in any way. Doing so
voids the warranty.
2
connection / battery
®
keyboard
®

4. System requirements

• The keyboard works with Bluetooth
tablet PCs and smartphones running iOS, Android
and Windows.
The requirements for keyboard use are as follows:
• iPad and iPhone devices require iOS 13.5 or higher
• Android devices require Android 7.0 or higher
• Bluetooth-enabled Windows devices require
Windows 8, Windows 10 or Windows 11
Check whether the latest version is installed and, if
necessary, perform a software update.
Note
To ensure that the keyboard functions properly,
check that the right keyboard layout (QWERTZ,
QWERTY etc.) is set in your device's settings.
• Note that support for certain key functions may
vary depending on your device.
• If some keys on the Bluetooth
not work properly on your device for software
reasons, you can run them via the virtual
keyboard.
• Please refer to the operating instructions for the
device you are using.
5. Getting Started
Warning – Batteries
• When inserting batteries, note the correct
polarity (+ and - markings) and insert the
batteries accordingly. Failure to do so could
result in the batteries leaking or exploding.
• Only use batteries (or rechargeable batteries)
that match the specified type.
• Before you insert the batteries, clean the battery
contacts and the polar contacts.
• Do not allow children to change batteries
without supervision.
• Do not mix old and new batteries or batteries of
a different type or make.
• Remove the batteries from products that are not
being used for an extended period (unless these
are being kept ready for an emergency).
• Do not short-circuit batteries.
• Do not charge batteries.
• Do not throw batteries in a fire.
-enabled
®
keyboard do
®