Typographical Conventions; Bulleted Lists; Actions; Numbers - Balluff MATRIX VISION BVS CA-SF2 Serie Betriebsanleitung

BVS CA - SF2 - _ _ _ _ _ _ - _ _ _ _ _ _ - XAS2
2 USER INSTRUCTIONS
2.2

Typographical conventions

2.2.1 Bulleted Lists

2.2.2 Actions

2.2.3 Numbers

2.2.4 Parameters

2.2.5 Directory paths

2.2.6 ASCII code

2.2.7 Symbols

www.matrix-vision.com www. matrix-vision.com
The following conventions are used in this manual:
Enumerations are shown as a list with an en-dash.
•
Entry1
•
Entry 2
Action instructions are indicated by a preceding triangle. The result of an action is indi-
cated by an arrow.
1. Action instruction 1
a. Action result
2. Action instruction 2
•
Decimal numbers are shown without additional indicators (e.g. 123).
•
Fixed-point numbers are shown with a period (e.g. 0.123).
•
Hexadecimal numbers are shown with the additional indicator hex (e.g. 00
Parameters are shown in italics (e.g. CRC_16).
Path information for saving data is shown with fixed font width (e.g.
Types\Benutzerdefiniert
Characters transmitted in ASCII code are set in apostrophes (e.g. 'L').
NOTE
A note indicates important information that helps you optimize usage of the prod-
ucts.
WARNING
A warning indicates how to avoid either potential damage to hardware or loss of
data.
ATTENTION
An attention indicates a potential for property damage, personal injury, or death.
).
).
hex
Projekt:\Data
4