Optimizinglampallignment; Focussingtheunit - JB-Lighting Varyscan 3 Special 250MSD Bedienungsanleitung

Varyscan 3 Special 250MSD
3.7 Optimizing lamp alignment
Switch on the Varyscanandprojectgobono.1(beam)
onawhitewallina90°angle. Thedistancebetween
Varyscanandwallshould be6to12meters.
Loosenboth screws no.1(seedrawing)andmove
lampholder untilthelightoutputisatitsmaximum.
Tightenboth screwsno.1again.
3.8 Focussing theunit
Project oneofthegobosonawall,atthedesiredprojectiondistance.
Loosen screw ontheobjectiv andshiftituntilprojection oftheimage
isatthedesiredstate.Tighten screw again.
JB-lighting Lichtanlagentechnik GmbH Sallersteigweg15 D-89134Blaustein Tel. ++49-7304-9617-0
Backsideview
1
Lampholder
23