Operating The Air Cooler - Inventum VLK403W Gebrauchsanleitung

4

operating the air cooler

In addition to cooling, the air cooler has two other modes, i.e. ventilation and air humidification.
The air cooler can be operated via the control panel on the appliance.
• Choose a location near a socket.
• Insert the plug in a socket.
• Do not share the socket with any other appliances.
Switching on/off
• Manually open the front fins.
• Press one of the ventilation speeds to switch on the appliance.
• Press the off key to switch off the appliance.
Ventilation
The ventilation position can be set to different speeds.
• Press one of the ventilation speeds to switch on the appliance.
LOW: low speed
MID: medium speed
HIGH: high speed
• Change the ventilation speed by pressing another key.
Cooling / Humidifying
The appliance is able to cool the air flow or humidify the house by adding cold water in the water tank.
Create additional cool air by placing a frozen cooling element in the water in the water tank. The appliance is supplied with
two cooling elements, so you can use them alternately and the appliance is able to cool continuously.
Caution: only use this mode when the water tank is provided with fresh cold water.
Turn the lock lever of the tank to a horizontal position and carefully pull the water tank out of the appliance to fill it. Fill the
water tank with fresh cold water and make sure that the water level in the water tank does not exceed the maximum level
(MAX).
If you place a frozen cooling element in the water tank, make sure the water level does not exceed the maximum level.
Place the water tank back in the original position and turn the lock lever to the vertical position.
• Press one of the ventilation speeds to switch on the appliance.
• Press the cooling key.
• If necessary, change the fan speed by pressing another key.
• Press the off key to switch off the appliance.
Extra instructions
• Always use fresh cold water.
• Make sure the water in the water tank does not come below the minimum level (MIN) when using the cooling or air
humidification mode.
Swing mode
By means of the swing mode you can determine the back and forth movements of air flow for a better air displacement.
• Switch the appliance to the required speed.
• Press the swing key and the inner fins start to move to the left and right continuously, as a result of which the air flow
moves back and forth.
• The up and down wind direction can be adjusted manually by pushing the front fins upwards or downwards.
15
English •