Dräger CDR 4500 Gebrauchsanweisung Seite 18

Transport
After testing
1. Disconnect the adapter.
2. Remove the full face mask from the test head and dry it if
necessary.
3. Fit the exhalation valve cover so that it clicks into place.
5 Transport
Transport the full face mask in a carrying box or mask bag.
6 Storage
Loosen the harness as far as possible.

Wipe the visor with an antistatic cloth.

Make sure that the full face mask is dry.

Pack the full face mask in its bag or carrying box.

Store the full face mask in a dry, dust-free place where it cannot

become deformed.
Protect from direct sunlight and thermal radiation.

Storage temperature: -15 °C to +25 °C

Observe ISO 2230 and national regulations concerning the

storage, maintenance and cleaning of rubber products.
Dräger rubber products are treated with an agent to protect against
premature ageing which in some cases is visible as a grey-white
coating. This coating can be washed off with a brush and soapy water.
7 Disposal
Dispose of the full face mask and used filters according to the
applicable regulations.
18 (approved by Dekra Exam) Dräger CDR 4500