Safety Instructions - LIVARNO HG02266A Montage-Und Sicherheitshinweise

LED SHOWER HEAD
˜ Introduction
We congratulate you on the purchase of your new
product. You have chosen a high quality product.
Familiarise yourself with the product before using it
for the first time. In addition, please carefully refer
to the operating instructions and the safety advice
below. Only use the product as instructed and only
for the indicated field of application. Keep these
instructions in a safe place. If you pass the product
on to anyone else, please ensure that you also
pass on all the documentation with it.
˜ Intended use
The product is suitable for use with all pressure-
resistant hot water systems such as central heating,
continuous-flow water heater, pressure boiler etc.
The product is not suitable for non-pressurised
water heaters such as wood-fired or coal-fired
hot-water heaters, oil-fired or gas-fired heaters,
open electrical storage heaters. The product is
intended for personal use only and not for medical
or commercial use.
˜ Technical data
Hand shower: HG02266A:
2-way setting
HG02266B:
5-way setting
Dimensions
shower head: HG02266A:
approx. 125 x 272 x 60 mm
(W x H x D)
HG02266B:
approx. 124 x 265 x 65 mm
(W x H x D)
Minimum
working pressure: 1.5 bar
(without water saving insert)
8 GB/IE

Safety instructions

KEEP ALL THE SAFETY ADVICE AND
INSTRUCTIONS IN A SAFE PLACE FOR FUTURE
REFERENCE!
m CAUTION! To avoid the risk of injury!
Never leave children unsupervised with the
packaging materials. It is not a toy.
m CAUTION! RISK OF INJURY! Ensure that
no parts are damaged and that all parts are
correctly assembled. Incorrect assembly or
fitting may lead to injury. Damaged parts can
adversely affect safety and proper function.
m CAUTION! RISK OF SCALDING!
Adjusting the hand shower may change the
temperature of the water coming out. Check
the water temperature before stepping into the
shower.
WARNING!
The product is suitable for use
with all pressure-resistant hot water systems
such as central heating, continuous-flow
water heater, pressure boiler etc. The product
is not suitable for use with non-pressurised
water heaters such as boilers, nonpressurised
reservoirs, etc. In case of doubt, consult a
professional plumber or technical consultant.
Make sure that the product is only installed by
capable persons.
Check the product regularly for leakage.