Troubleshooting; Possible Cause; Maintenance And Care; Maintenance - Eufab 21084 Bedienungsanleitung

6.8 TROUBLESHOOTING

Error

Possible cause

The connection
cable is not
connected
correctly.
The
For vehicle
compressor
operation:
does not
No voltage at the
workt
on-board socket.
The fuses in the
plug of the 12 V car
cable has tripped.

7. MAINTENANCE AND CARE

7.1 MAINTENANCE

When used according to the instructions, the Dual Power
Compressor is maintenance-free. Store the compressor in a
dry, frost-free location.

7.2 CARE

Switch the compressor off before cleaning, separate from the
power supply. Clean the housing of the compressor with a
soft, dry cloth. Do not use any aggressive cleaning agents or
solvent-based cleaners. Never allow liquids to penetrate the
housing.

8. NOTES REGARDING ENVIRONMENTAL PROTECTION

Do not dispose of electrical appliances in household
waste! Discarded electrical and electronic equip-
ment must be collected separately and recycled in
an environmentally sound manner.
Contact your municipal or city government on how
to dispose of old electronic equipment.
The materials are recyclable. You are making an im-
portant contribution to protecting our environment
through recycling, material recycling or other forms
of re-utilising old appliances!
Dispose of the compressor in accordance with the
laws and conditions in your country.
Measure
Check the connection
of the cables and
connect them
correctly.
Switch on the
ignition of the
vehicle. Check the
fuse for the boron
socket and replace it
if necessary.
Replace the defective
fuse, see section 6.7

9. CONTACT INFORMATION

EAL GmbH
Otto-Hausmann-Ring 107
42115 Wuppertal, Germany
+49 (0)202 42 92 83 0
+49 (0) 202 42 92 83 – 160
info@eal-vertrieb.com
www.eal-vertrieb.com
13