Maico MVS 6 Montageanleitung Seite 10

11 Disassembly and environmentally-sound disposal
11 Disassembly and environment-
ally-sound disposal
DANGER Danger of electric shock.
Prior to accessing the connection terminals, dis-
connect all supply circuits.
Secure against being switched back on, check
that no voltage is present.
Earth and connect the EARTH with active parts
which are to be short-circuited.
Cover or block off neighbouring live components.
Attach a clearly visible warning sign.
Ensure that there is no explosive atmosphere
and/or dust layers.
• Only a qualified electrician trained in and au-
thorised for explosion protection work may un-
dertake disassembly.
Old devices and electronic components may
only be dismantled by specialists with elec-
trical training. Proper disposal avoids detri-
mental impact on people and the environment
and allows valuable raw materials to be reused
with the least amount of environmental impact.
Do not dispose of the following
components in household waste!
Old devices, wearing parts (e.g. air fil-
ters), defective components, electrical
and electronic scrap, environmentally
hazardous liquids/oils, etc. Dispose of
them in an environmentally friendly
manner and recycle them at the ap-
propriate collection points (→ Waste
Disposal Act).
1. Separate the components according to mater-
ial groups.
2. Dispose of packaging materials (cardboard,
filling materials, plastics) via appropriate re-
cycling systems or recycling centres.
3. Observe the respective country-specific and
local regulations.
Company information
© Maico Elektroapparate-Fabrik GmbH. Trans-
lation of the original German operating instruc-
tions. Misprints, errors and technical changes are
reserved.
10