Herunterladen Diese Seite drucken

Safety Information - Axis Communications A1610-B Installationsanleitung

Vorschau ausblenden Andere Handbücher für A1610-B:

Werbung

English

Safety information

Hazard levels
DANGER
Indicates a hazardous situation which, if not avoided,
will result in death or serious injury.
WARNING
Indicates a hazardous situation which, if not avoided,
could result in death or serious injury.
CAUTION
Indicates a hazardous situation which, if not avoided,
could result in minor or moderate injury.
NO TICE
TICE
NO
NO
TICE
Indicates a situation which, if not avoided, could result
in damage to property.
Other message levels
Important
Indicates significant information which is essential for
the product to function correctly.
Note
Indicates useful information which helps in getting
the most out of the product.
Safety instructions
WARNING
The Axis product shall be installed by a trained
professional, and in compliance with local laws and
regulations.
NO TICE
TICE
NO
NO
TICE
The Axis product shall be used in compliance with
local laws and regulations.
Axis recommends using a shielded network cable
(STP).
To use the Axis product outdoors, or in similar
environments, it shall be installed in an approved
outdoor housing.
Store the Axis product in a dry and ventilated
environment.
Avoid exposing the Axis product to shocks or heavy
pressure.
Avoid exposing the Axis product to vibration.
Install the product using screws and plugs
appropriate for the material (e.g. wood, metal,
sheet rock, stone).
Do not install the product on unstable poles,
brackets, surfaces or walls.
Do not install the product on vibrating poles,
brackets, surfaces or walls.
Use only applicable tools when installing the Axis
product. Using excessive force with power tools
could cause damage to the product.
Do not use chemicals, caustic agents, or aerosol
cleaners.
Use a clean cloth dampened with pure water for
cleaning.
Use only accessories that comply with the technical
specification of your product. These can be provided
by Axis or a third party. Axis recommends using
Axis power source equipment compatible with your
product.
Use only spare parts provided by or recommended
by Axis.
Do not attempt to repair the product yourself.
Contact Axis support or your Axis reseller for
service matters.
The power supply shall be plugged in to a socket
outlet installed near the product and shall be easily
accessible.
Use a limited power source (LPS) with a rated
output power limited to ≤100 W and a rated output
current limited to ≤5 A.
Transportation
NO TICE
TICE
NO
NO
TICE
Keep the protective packaging. When transporting
the Axis product, the protective packaging shall be
replaced in its original position.
When transporting the Axis product, use the
original packaging or equivalent to prevent damage
to the product.
Battery
The Axis product uses a 3.0 V CR2032 lithium battery
as the power supply for its internal real-time clock
(RTC). Under normal conditions this battery will last
for a minimum of five years.
Low battery power affects the operation of the RTC,
causing it to reset at every power-up. When the
battery needs replacing, a log message will appear
in the product's server report. For more information
about the server report, see the product´s web page
or contact Axis support.
WARNING
Risk of explosion if the battery is incorrectly
replaced.
The battery should be replaced with an identical
battery only.
Used batteries should be disposed of according to
local regulations or the battery manufacturer's
instructions.
CAUTION
Do not replace the battery yourself. Contact Axis
support if the log message requests a battery change.
Lithium coin cell 3.0 V batteries contain
1,2-dimethoxyethane; ethylene glycol dimethyl ether
(EGDME), CAS no. 110-71-4.
Français
Informations sur la sécurité
Niveaux de risques
DANGER
Indique une situation dangereuse qui, si elle n'est pas
évitée, entraînera le décès ou des blessures graves.
AVERTISSEMENT

Werbung

loading