Bluetooth; Sleep - Noxon A120 Bedienungsanleitung

Settings
●
Scan settings: By default, FM scans stop at any available station.
This may result in a poor signal-to-noise ratio (hiss) from weak
stations. To change the scan settings to stop only at stations with
good signal strength, select "Yes" after choosing "Strong station
only?"
●
Audio settings: All stereo stations are reproduced in stereo. For
weak stations, this may result in a poor signal-to-noise ratio (hiss).
To play weak stations in mono, select FM weak reception: "Listen
in mono only", and then "YES".

7.6 Bluetooth

In Bluetooth mode, you can turn on the Bluetooth of your Bluetooth
device. Go to the menu and turn Bluetooth discoverable. From your
Bluetooth device, search the radio A120+ to pair. When it is waiting for
pairing, there is a blinking Bluetooth icon at the bottom. If the pairing
is successful, the Bluetooth icon becomes steady.
Control the music playback from your Bluetooth device.
Control the music playback from your Bluetooth device. Press
on the remote control to go back to forward track or go to next track.
Press to play or pause the track.
To disconnect from the radio, press and hold BT PAIR on remote
control.

7.7 Sleep

To set the sleep timer, select Sleep under Main menu. Or press
Sleep/Snooze on the remote control to set. Choose from Sleep OFF, 15,
EN
/
19