good signal strength, select Local scan. Once the scan is complete, the
radio shows a list of available stations.
To remove stations that are listed but not unavailable, choose Prune
invalid. Turn the navigate reel to view a list of stations and press to
select. Once selected, the station plays and the screen show
information about station, track or show as broadcast.
Settings
●
Dynamic range compression (DRC): If you are listening to music
with a high dynamic range in a noisy environment, you may wish
to compress the audio dynamic range. This makes quiet sounds
louder, and loud sounds quieter. You can change DRC as off, low,
or high.
●
Station order: You can choose the order of the DAB+ station list to
be either Alphanumeric, Ensemble, or Valid. Ensemble lists groups
of stations that are broadcast together on the same ensemble.
Valid lists valid stations first, alphanumerically, then off-air
stations.
7.5 FM Radio
FM radio mode receives analogue radio from the FM band and
displays RDS (Radio Data System) information about the station and
where broadcast.
To find a station, press
the device scans the FM band. Alternatively, you can scan up or down
by pressing
EN
. The frequency display starts to run up as
/
on the remote control manually.
18