Noxon A120 Bedienungsanleitung Seite 52

Select "YES" and confirm you will launch the setup wizard.
If you select "NO", the next window will ask you choose if you want to
start the setup wizard again next time you power the device on.
The setup wizard helps you setup the main use of the device.
Setting date and time
Select "12" for 12-hour display format or "24" for 24-hour display
format. If you select the 12-hour format, the display shows "AM" in
the morning or "PM" in the afternoon after the time.
After this, the following interface is to define if the time to be
synchronized from radios: Update from DAB+, Update from FM,
Update from Network, or No update
If you choose "Update from Network" you must indicate your time
zone in the next window.
Next choose "ON" for summer time, otherwise select "OFF".
If you choose "No update", you will have to enter the date and time
manually.
"AM"/"PM" displays only if you have chosen the 12-hour time format.
Select "AM" for the morning hours or "PM" for the afternoon hours.
Network setting
First, the device asks whether to keep the network connected. If you
want to control the device in all operating modes via the app, select
"YES". If you choose "NO", it is not possible to control the device from
the app in the (Standby, AUX-IN, FM, DAB+) operating modes. Note
that the power consumption in standby mode will be higher when the
network connection is kept up.
Any WLAN networks found are listed on the display, along with their
EN 12