How To Use; User Setting; Battery Alarm - Uspa UB-6635R Bedienungsanleitung

6 How to use

Dry
- Press this button to activate warm drying for 3 minutes.
- To alter the intensity of the dryer, press the button again.
- Drying temperature can be adjusted by pressing LOW or HIGH
(5 levels).
Bidet
- Press this button to activate feminine wash. The function will stop
automatically after 1 minute.
- Press this button again to activate oscillation. The nozzle moves
automatically back and forth to widen cleansing area.
- To stop oscillation press again this button.
Cleansing
- Press this button to activate posterior hygiene. The function will stop
automatically after 1 minute.
- Press this button again to activate oscillation. The nozzle moves
automatically back and forth to widen cleansing area.
- To stop oscillation press again this button.

User setting

See page 10
Stop
- Press this button to stop current operation.
- When the user stands up, all operation will automatically stop.
Eco
- Press this button for 2 seconds to activate the power saving mode.
- Seat and water temperature will be set at the lowest temperature for
saving power.
Temperature adjustment
- Temperature of seat and water can be adjusted by pressing
or
- There are four levels of temperature: Room temp (off) – Low (34 °C)
– Medium (37 °C) – High (40 °C) .

Battery Alarm

- Change the batteries if the battery icon on LCD is flickering (front LED
will also flicker).
8
(water / seat)
.
[Front]