Machine Information; Technical Specifications - Ferm VCM1004 Bersetzung Der Originalbetriebsanleitung

2. MACHINE INFORMATION

Intended use
The vacuum cleaner is intended for domestic
coldash vacuuming, for example, cleaning
a fireplace, barbeque or other ash residue. The
vacuum cleaner is equipped with a blowing
function. It can be used to blow dust and debris
out of garages or of patios and driveways. The
device is not suitable for commercial or industrial
use.

Technical specifications

Model no
Voltage battery
Suction force 10 kPA,
Container capacity Approx.
Tube diameter
Filter
Hose length
Weight (incl. accessories)
Sound power level L
WA
Model no
Battery Type
Voltage
Capacity
Recommended charger
Weight
Model no
Charger input
Max 1A
Charger output
Charging time 2.0Ah battery
Charging time 4.0Ah battery
Recomended batteries
Weigth
Only use the following batteries of the AX-POWER
20V battery platform. Using any other batteries
could cause serious injury or damage the tool.
CDA1154 20V, 2Ah Lithium-Ion (Included)
CDA1155 20V, 4Ah Lithium-Ion
The following chargers can be used to charge
these batteries.
CDA1156
CDA1157
CDA1175
CDA1171
The batteries of the AX-POWER 20V battery
platform are interchangeable with all the FERM
AX-POWER battery platform tools.
DESCRIPTION
The numbers in the text refer to the diagrams on
page 2-4.
VCM1004
20V
1. On/Off switch
10 kPA, 0.6m3/min
2. Carrying handle
Approx. 12L
3. Vacuum port
4. Blowing port
Ø 35mm
5. Metal locking clamp
HEPA
6. Nozzles storage
1.0m
7. Container
2.4 kg
8. Top section
76 dB(A)
9. Hose
10. Aluminium round nozzle
11. Aluminium crevice nozzle
CDA1154
12. HEPA Filter
Lithium-Ion
13. Filter holder
20V
14. Battery
2.0 Ah
15. Battery unlock button
16. Battery LED indicators button
CDA1156, CDA1157,
CDA1175, CDA1171
17. Battery LED indicators
18. Charger
0.3 kg
CDA1156
100-240V~ 50/60Hz
20V
21.5V 1.7A
90 minutes
120 minutes
CDA1154, CDA1155
0.15 kg
Removing the battery from the machine
Fig. B2
• Push the battery unlock buttons (15) and pull
Charger adapter (Included)
Quick charger
Quick charger
Quick charger
3. ASSEMBLY
Before any work on the power tool,
remove the battery.
The battery must be charged before first
use.
the battery out of the machine like shown in
Fig. B2.
7