Aritech ATS1741 Installation Sheet Seite 2

ATS 1741 Modem
TX RX
RX TX
RTS CTS
CTS RTS
GND GND
Links
•
Term: Refer to the control panel installation guide.
•
Earth: Item 1 in Figure.
Specifications
Operating voltage
Operating current
Operating temperature
Relative humidity
Regulatory information
PLACED ON THE MARKET BY:
Manufacturer
Carrier Fire & Security Americas Corporation Inc.
13995 Pasteur Blvd
Palm Beach Gardens, FL 33418, USA
AUTHORIZED EU REPRESENTATIVE:
Carrier Fire & Security B.V.
Kelvinstraat 7, 6003 DH Weert, Netherlands
Product warnings THESE PRODUCTS ARE INTENDED FOR SALE
and disclaimers TO AND INSTALLATION BY QUALIFIED
PROFESSIONALS. CARRIER FIRE &
SECURITY CANNOT PROVIDE ANY
ASSURANCE THAT ANY PERSON OR ENTITY
BUYING ITS PRODUCTS, INCLUDING ANY
"AUTHORIZED DEALER" OR "AUTHORIZED
RESELLER", IS PROPERLY TRAINED OR
EXPERIENCED TO CORRECTLY INSTALL FIRE
AND SECURITY RELATED PRODUCTS.
For more information on warranty disclaimers and
product safety information, please check
https://firesecurityproducts.com/policy/product-
warning/
Certification
Carrier Fire & Security hereby declares that this
device is in compliance with the applicable
requirements and provisions of the Directive
2014/30/EU and/or 2014/35/EU. For more
information see www.firesecurityproducts.com or
www.aritech.com
REACH Product may contain substances that are also
Candidate List substances in a concentration
above 0.1% w/w, per the most recently published
Candidate List found at ECHA Web site.
Safe use information can be found at
https://firesecurityproducts.com/en/content/intrusi
on-intro
2 / 18
DB25 DB9
Pin 2 Pin 3
Pin 3 Pin 2
Pin 5 Pin 8
Pin 4 Pin 7
Pin 7 Pin 5
12 V
100 mA
0 to +50°C
<95% non condensing
or scan the QR code.
2012/19/EU (WEEE directive): Products marked
with this symbol cannot be disposed of as
unsorted municipal waste in the European Union.
For proper recycling, return this product to your
local supplier upon the purchase of equivalent
new equipment, or dispose of it at designated
collection points. For more information see:
www.recyclethis.info
Contact information
www.firesecurityproducts.com or www.aritech.com
For customer support, see www.firesecurityproducts.com
DA: Installationsvejledning
Montering af enheden
Kortet har en standard Aritech 'B' printplade, der kan monteres
i et eksisterende Aritech-kabinet
Tilslutninger J2
•
+12 V: 12 V dc forsyning. Maksimalt 100 mA.
•
0 V: Negativ forsyning.
•
D+: RS485-databussens positive datatilslutning.
•
D+: RS485-databussens negative datatilslutning.
Enheder kan være op til 1,5 km fra 4-dørs DGP'en eller
centralenheden, afhængigt af hvilket kabel der bruges. WCAT
52/54 anbefales. 2-parsnoet skærmet datakabel.
Tilslutninger J1
•
TX: RS232-dataoverførsel.
•
RX: RS232-datamodtagelse.
•
CTS: Klar til at sende.
•
RTS: Anmodning om at sende.
•
GND: Isoleret RS232-jord.
LED's
•
TX LED: LED blinker for at angive, at der modtages data
som RS232 og overføres data som RS485.
•
RX LED: LED blinker for at angive, at der modtages data
som RS485 og overføres data som RS232.
Udvidede afstande mellem Titan og
ATS1801
ATS1741 (RS485 til RS232 interface) til PC
ATS1741 (RS232) PC (RS232)
Navne på ben Navne på ben
TX RX
RX TX
CTS *Ikke tilsluttet
RTS *Ikke tilsluttet
GND GND
*Kæden RTS-CTS *Kæden RTS-CTS
P/N MAINST-ATS1741 (ML) • REV C • ISS 15DEC20
DB25 DB9
3 2
2 3
6, 8, 20 1, 4, 6
– –
7 5
4-5 7-8