Intended Use - Makita UX01G Betriebsanleitung

Symbols
The followings show the symbols which may be used
for the equipment. Be sure that you understand their
meaning before use.
Read instruction manual.
Take particular care and attention.
Do not expose to moisture.
Noise
EM401MP (as a brushcutter)
EM401MP (as a string trimmer)
EM404MP (as a brushcutter)
EM404MP (as a string trimmer)
EM406MP
EM407MP
Attachment
Nylon cutting head
Plastic blade
Nylon cutting head
Plastic blade
Nylon cutting head
Plastic blade
Only for EU countries
Ni-MH
Due to the presence of hazardous com-
Li-ion
ponents in the equipment, waste electrical
and electronic equipment, accumulators
and batteries may have a negative impact
on the environment and human health.
Do not dispose of electrical and electronic
appliances or batteries with household
waste!
In accordance with the European Directive
on waste electrical and electronic equip-
ment and on accumulators and batteries
and waste accumulators and batteries,
as well as their adaptation to national law,
waste electrical equipment, batteries and
accumulators should be stored separately
and delivered to a separate collection point
for municipal waste, operating in accor-
dance with the regulations on environmen-
tal protection.
This is indicated by the symbol of the
crossed-out wheeled bin placed on the
equipment.

Intended use

This cordless multi function power head is intended for
driving an approved attachment listed in the section
"SPECIFICATIONS" of this instruction manual. Never
use the unit for the other purpose.
WARNING:
Read the instruction manual of
the attachment as well as this instruction manual
before using. Failure to follow the warnings and
instructions may result serious injury.
Sound pressure level
average
L (dB (A)) Uncertainty
pA
K (dB (A))
79.8 1.2
80.1 1.0
79.4 1.0
79.4 1.4
80.7 1.3
78.6 0.7
81.3 0.6
78.8 0.4
84.7 1.7
8 ENGLISH
Sound power level Applicable
average
L (dB (A)) Uncertainty
WA
K (dB (A))
94.8 2.5
(ISO11806-1)
94.3 2.0
(ISO11806-1)/
EN50636-2-91
91.4 2.1
(ISO11806-1)/
EN50636-2-91
92.0 1.0
(ISO11806-1)
91.9 1.4
(ISO11806-1)/
EN50636-2-91
87.8 0.4
(ISO11806-1)/
EN50636-2-91
93.4 2.1
(ISO11806-1)/
EN50636-2-91
87.9 0.6
(ISO11806-1)/
EN50636-2-91
99.0 1.3
(ISO11806-1)
standard
ISO22868
ISO22868
ISO22868
ISO22868
ISO22868
ISO22868
ISO22868
ISO22868
ISO22868