Care And Maintenance - Mobilex NEW CLASSIC Gebrauchsanleitung

Mobilex A/S
Grønlandsvej 5
DK-8660 Skanderborg
www.mobilex.dk

5. Care and maintenance

✔ The frame ought to be cleaned with use of damp cloth alternatively with addition of a soft detergent.
✔ CAUTION! The frame should be regularly controlled, to find on time the damages of varnish, which my
cause corrosion.
✔ The seat and the backrest are made of a very durable strengthened nylon. The seat upholstery can be easily
removed by loosening the screws placed on the frame tubes. The backrest upholstery can be removed by
slackening the screws placed on the backrest tubes.
✔ The seat and the backrest upholstery can be washed with use of sponge and gentle washing soap.
Expected service life: Normally 5 years depending on use.
Storage: We recommend storage in a dry place in temperatures above 0 °C.
Transportation
Place the wheelchair in the car boot. If, for some reason, it is not possible, put the
folded wheelchair between the front and the rear seats inside the car ensuring that
the wheelchair is in a sure and stable position. If it is not possible the wheelchair
should be fasten with the safety belt.
WARNING! The wheelchair is not the car seat. During traveling by vehicles seating
on the wheelchair is not allowed. The chair should be folded and safely
immobilized.
Reuse
The product is suitable for reuse. Before a new user takes over the product, it must be checked according to point 5.
Parts, which should be regularly inspected
Part name
Tyres Tyre pressure, condition of tread and tyres. One should take
care, to keep the pressure in both tyres on the same level.
Harder tyres provide better maneuverability of the wheelchair
and larger easiness of driving, but they reduce the comfort on
uneven surface.
Spokes Loose spokes can cause deformation of the rear wheels. Contact
your point of sale or local bicycle service to manage the problem
of loose spokes.
Wheel axles Remove the hair or accumulated dirt
Push Rims Excessively scratched push rims ought to be exchanged
because they can wound the user's hands during driving the
wheelchair
Brakes The braking force depends on the tyre pressure. The efficiency
of brake operation can be also affected with dirt accumulated on
tyres. Keep the brakes clean wiping them with a damp cloth to
remove dirt, and also lubricating the funnel of screws, on which
the brake levers turn.
Frame Maintain the wheelchair in the highest cleanness for better
comfort of the user.
Turning wheels The area between the fork and the front wheel should be kept
clean, because of dirt accumulating there, which can cause
faster wear of turning wheel bearings. To do so, one should
disassemble the front wheel by unscrewing it from the fork,
remove all dirt, and then preserve the metal elements of the
wheel (i.e. technical grease).
Detachable Check condition of detachable elements of the wheelchair, if
elements screws are loosen they should be tighten.
(If equipped) One should clean and then lubricate lightly the quick-release
Quick-release axles of the rear wheels, with a damp cloth the slots of fixing the
axles of the quick-release axles ought to be cleaned up from all dirt. The
rear wheels wheel should be laid on the base, resting on the push rim (never
opposite way, because the quick-release axle can be soil, which
can cause its seizing in the main axle opening. In case of solid
particles occurring on the surface of the quick-release axle of
the wheel, using is not allowed.
Rev. 07-22
Control type
20/40
Control frequency
At least once a week
If the problem occurs
If necessary
If necessary
Control the correctness of brake operation
at least once a month
At least once a month
The maintenance ought to be made once a
month or often depending on the soiling
degree.
In case of intensive exploitation of the
wheelchair the inspection should be carry
out once a month.
Lubricating should be carried out
periodically.
UM-271540-MULTI_20220722