Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
2 EN-US English
2.6 View from the front
See Figure 1.1 View from the front, page 1.
1.
Visual camera.
2.
Thermal camera.
3.
Phone connector.
4.
Height control for the OneFit connector.
2.7 View from the bottom
See Figure 1.2 View from the bottom, page 1.
1.
On/off switch and Power indicator.
2.
Charge indicator LED.
3.
USB-C power connector.
2.8 Quick start guide
1.
Charge the FLIR ONE camera for approximately 40 minutes.
2.
Download the FLIR ONE app from your preferred app store, and then install
it on your phone.
3.
Push the On/off button on the bottom of the FLIR ONE camera to turn it on. It
takes about 20 seconds for the camera to start. The indicator will flash green
when the FLIR ONE camera is ready.
4.
Connect the FLIR ONE camera to your phone. If needed, adjust the blue dial
of the OneFit connector and extend the connector to fit your phone's protec-
tive case.
5.
Start the FLIR ONE app on your phone.
6.
The onboarding of the FLIR ONE app will guide you and help you setup the
permissions for the app. After that, the app is opened in Photo mode and is
ready to use.
7.
To turn off the FLIR ONE camera, push and hold the On/off button for more
than 2 seconds.
#T810402; r. AC/77079/77079; mul
3
Werbung
Inhaltsverzeichnis
