Installation
Connecting to power supply/charging the battery
Insert the adapter plug into a power supply. Place the magnetic charging base
connected to the adapter on a flat surface. Align charging port on fan base to
charging base. Bring charging port close to the charging base, and they will
connect automatically (see the left figure below).
There is a battery contained inside the fan base. When it is sufficiently
charged, gently step on the adapter cord to separate the adapter from the
device. The device can then be used independently (see the right figure below).
If the fan is connected to a power supply, no battery power will be consumed while
it is running, and the battery will be charged to full capacity.
Charging
When the battery level is between 0%–90%, the indicator light is orange and
slowly fades off in 12 seconds.
When the battery level is between 91%–100%, the indicator light remains solid
green for 12 seconds.
Magnetic charging port
Operating on the battery
Indicator status
Battery level
Green light solid for
21%-100%
20 seconds
Orange light solid
11%-20%
Orange light blinking
0%-10%
Pairing Procedure for Fan Remote Control
Press and hold both the "vertical oscillation"
button and the "timer" button located on the
air circulator fan for 2 seconds. When you hear
a long beep, the fan has entered pairing mode.
Within 30 seconds, press and hold both the
"vertical oscillation" button and the "horizontal
oscillation" button" for 2 seconds. When you hear
a long beep, the remote control has been paired.
Note: If pairing is not successful within 10 seconds, the fan will resume normal
operation and clear existing pairing information.
Child Lock Setting
Setting child lock: The child lock must be enabled on the app. Disable
child lock: Press and hold both the "horizontal oscillation" button and the
"timer" button for 2 seconds. When you hear a long beep, the child lock has
been disabled.
Turning Wi-Fi on/off
Turning Wi-Fi off: Press and hold both the "mode" button and the "timer"
button for 2 seconds. When you hear a long beep, Wi-Fi has been turned off
and the Wi-Fi indicator on the unit will turn off.
Turning Wi-Fi on: When Wi-Fi is off, press and hold both the "mode" button
and "timer" button for 2 seconds. When you hear a long beep, Wi-Fi has
been turned on and the Wi-Fi indicator on the unit will blink.
Resetting Wi-Fi
Press both the "power" button and the "level/
mode" button for 5 seconds. When you hear a long
beep, Wi-Fi has been reset.
8
Body buttons
Remote control buttons
Body buttons