Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Use
Features
Temperature-sensing
mode indicator
On/Off button
Temperature-sensing
mode / Set Level button
Power on/off
Power on
Press the
button to start the fan. When it is turned on for the first time,
the wind speed will be set at Level 1. When it is turned on again after being
turned off, the wind speed will default to the level set when last powered on.
Press the
button again to turn off fan.
Set Level button
Temperature-sensing Mode
Press and hold the
button to switch to temperature-sensing mode. In
temperature-sensing mode, the temperature-sensing mode indicator remains
on. The next time the fan is switched on, it will return to its previous mode by
default. Press and hold this button again to return to normal mode.
Both temperature-sensing and standard modes feature four fan speed options.
In temperature-sensing mode, the starting wind speed varies dependent on
fan speed selection, which corresponds to four temperature sensing frequency
conversion algorithms.
Level-setting mode
Short press the
button to change level setting. For every press, the fan
speed will cycle between levels 1, 2, 3, and 4, indicated by the corresponding
level indicator (see table below).
Wind speed
Level 1
Status
indicators
Set horizontal oscillation
Press the
button to enable or disable horizontal oscillation. The next
time the fan is switched on, it will return to its previous horizontal oscillation
setting by default.
Press the
button again to disable horizontal oscillation.
10
Level indicator
Wi-Fi status indicator
Scheduled off
Vertical button
Horizontal Oscillation button
Level 2
Level 3
Level 4
Indicator on
Indicator off
Werbung
Inhaltsverzeichnis
