Screen Display - smartmi ZLBPKQXHS02ZM Bedienungsanleitung

Use
Set vertical oscillation
Press the button to enable or disable vertical oscillation. The next time
the fan is switched on, it will return to its previous vertical oscillation setting
by default.
Press the button again to disable vertical oscillation.
Setting the shutdown timer
Short press the button to cycle timer through 1 - 2 - 3 - 4 hours and off. The
corresponding timer indicator will be lit for 5 seconds. After 5 seconds, the timer
indicator will return to level indicator mode.
Timer Switch off 1 hour
Status
indicators
120°
2 hours 3 hours 4 hours
Indicator on Indicator off
100°

Screen display

Note: Natural mode can be enabled or disabled in the app.
Wi-Fi status indicator
Temperature-sensing indicator
Both temperature-sensing and standard modes feature four fan speed
options. In temperature-sensing mode, the starting wind speed varies
dependent on fan speed selection, which corresponds to four temperature
sensing frequency conversion algorithms.
Wind speed status indicators
The wind speed can be switched between level 1, 2, 3, and 4. The
corresponding status indicators will illuminate accordingly (refer to the
table below).
Wind speed
indicators
Natural breeze status indicator
Enable or disable in the app.
11
Power Level Level
off 1 2
Status
Indicator on
Level Level
3 4
Indicator off