Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
SYSTEM 4
Sensor
Connections
• Connect the VIDEO IN connectors of this unit to the video output connectors of the cameras.
• Connect the VTR OUT connector of this unit to the input connector of the time lapse VTR.
• Connect the VIDEO OUT connector of this unit to the input connector of the monitor.
• Connect the wires of the alarm sensors to the alarm input pins of ALARM/REMOTE connector.
• Connect the ALARM OUTPUT pin of the ALARM/REMOTE connector of this unit to the alarm input terminal of the time
lapse VTR.
• Connect the recover output (alarm reset output) of the time lapse VTR to the ALARM RECOVER IN pin of the ALARM/
REMOTE connector of this unit.
• Connect the ALARM RESET OUT pin of the ALARM/REMOTE connector of this unit to the alarm reset in terminal of the
time lapse VTR.
All manuals and user guides at all-guides.com
Sensor
VIDEO
4
3
2
1
OUT
IN
OUT
IN
OUT
IN
OUT
IN
Monitor
Sensor
Sensor
VTR
VIDEO
ALARM/REMOTE
OUT
OUT
VTR
-15-
WJ-MS424
SIGNAL GND
Monitor
Werbung
Inhaltsverzeichnis
