Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
SYSTEM CONNECTIONS
SYSTEM 1
The input video signals for this unit are not synchronized.
VIDEO
4
OUT
Notes :
• When pressing the ALARM RESET/QUAD/SEQ/ECS button or the VIDEO SELECT/CURSOR/SELECT buttons, the pic-
ture on the video monitor may roll briefly at the time of switching.
• The video signal to be recorded by the VTR should be supplied from the VTR OUT connector of this unit and not from
the VIDEO OUT/ESC connector of this unit, unless VTR servo control disturbances are allowable when setting the
ALARM RESET/ QUAD/SEQ/ECS button or the VIDEO SELECT/CURSOR/SELECT buttons.
Connections
• Connect the VIDEO IN connectors of this unit to the video output connectors of the cameras.
• Connect the VTR OUT connector of this unit to the video input connector of the time lapse VTR for recording.
• Connect the VIDEO OUT connector of this unit to the video input connector of the video monitor.
All manuals and user guides at all-guides.com
VIDEO
VIDEO
3
2
1
IN
OUT
IN
OUT
IN
OUT
IN
Monitor
VIDEO
VTR
VIDEO
ALARM/REMOTE
OUT
OUT
VTR
-12-
VIDEO
WJ-MS424
SIGNAL GND
Monitor
Werbung
Inhaltsverzeichnis
