Rapid BTX553 Bedienungsanleitung Seite 7

power tool. Power tools are
dangerous in the hands of unt-
rained users.
e) Maintain power tools and
accessories. Check for mis-
alignment or binding of mov-
ing parts, breakage of parts
and any other condition that
may affect the power tool's
operation. If damaged, have
the power tool repaired before
use. Many accidents are cau-
sed by poorly maintained power
tools.
f) Keep cutting tools sharp and
clean. Properly maintained
cutting tools with sharp cutting
edges are less likely to bind and
are easier to control.
g) Use the power tool, accesso-
ries and tool bits etc. in ac-
cordance with these instruc-
tions, taking into account the
working conditions and the
work to be performed. Use of
the power tool for operations dif-
ferent from those intended could
result in a hazardous situation.
h) Keep handles and grasping
surfaces dry, clean and free
from oil and grease. Slippery
handles and grasping surfaces
do not allow for safe handling
and control of the tool in unex-
pected situations.
5) BATTERY TOOL USE AND
CARE.
a) Recharge only with the charg-
er specifi ed by the manufac-
turer. A charger that is suitable
for one type of battery pack may
create a risk of fi re when used
with another battery pack.
b) Use power tools only with
specifi cally designated battery
packs. Use of any other battery
packs may create a risk of injury
and fi re.
c) When battery pack is not in
use, keep it away from other
metal objects, like paper clips,
coins, keys, nails, screws or
other small metal objects,
that can make a connection
from one terminal to another.
Shorting the battery terminals
together may cause burns or a
fi re.
d) Under abusive conditions,
liquid may be ejected from the
battery; avoid contact. If con-
tact accidentally occurs, fl ush
with water. If liquid contacts
eyes, additionally seek medi-
cal help. Liquid ejected from the
battery may cause irritation or
burns.
e) Do not use a battery pack or
tool that is damaged or mod-
ifi ed. Damaged or modifi ed
batteries may exhibit unpredict-
able behaviour resulting in fi re,
explosion or risk of injury.
f) Do not expose a battery pack
or tool to fi re or excessive
temperature. Exposure to fi re or
temperature above 130 °C/265
°F may cause explosion.
g) Follow all charging instruc-
tions and do not charge the
battery pack or tool out-
side the temperature range
specifi ed in the instructions.
Charging improperly or at tem-
peratures outside the specifi ed
range may damage the battery
and increase the risk of fi re.
6) SERVICE
7