Proper Use; Technical Data - EINHELL TC-BG 150 B Originalbetriebsanleitung

•
Check to see if all items are supplied.
•
Inspect the equipment and accessories for
transport damage.
•
If possible, please keep the packaging until
the end of the guarantee period.
Danger!
The equipment and packaging material are
not toys. Do not let children play with plastic
bags, foils or small parts. There is a danger of
swallowing or suff ocating!
•
Double-wheel grinder
•
Grinding wheel
•
Brushing wheel
•
Safety glass (2x)
•
Spark deflector (2x)
•
Workpiece support (2x)
•
Socket head screw (4x)
•
Washer (small) (4x)
•
Spring washer (small) (8x)
•
Nut (4x)
•
Lock bolt (long) (2x)
•
Locking knob (small) (2x)
•
Lock bolt (short) (2x)
•
Washer (large) (2x)
•
Spring washer (large) (2x)
•
Locking knob (large) (2x)
•
Original operating instructions
•
Safety information

3. Proper use

The double wheel grinder is a combination tool for
grinding as well as for cleaning metals, plastics
and other materials using the appropriate grinding
wheel or brushing wheel.
The machine is allowed to be used only for its
intended purpose! Even when the equipment is
used as prescribed it is still impossible to elimina-
te certain residual risk factors. The following ha-
zards may arise in connection with the machine's
construction and layout:
•
Contact with the grinding wheel where it is not
covered.
•
Catapulting of parts from out of damaged
grinding wheels.
•
Catapulting of workpieces and parts of work-
pieces.
•
Damage to hearing if essential ear-muffs are
not used.
Anl_TC_BG_150_B_SPK13.indb 18 Anl_TC_BG_150_B_SPK13.indb 18
GB
The equipment is allowed to be used only for its
prescribed purpose. Any other use is deemed to
be a case of misuse. The user/operator and not
the manufacturer will be liable for any damage or
injuries of any kind resulting from such misuse.
Please note that our equipment has not been de-
signed for use in commercial, trade or industrial
applications. Our warranty will be voided if the
equipment is used in commercial, trade or indust-
rial businesses or for equivalent purposes.

4. Technical data

Mains voltage: ........................ 220-240 V ~ 50 Hz
Power rating: ............. 185 W S1 | 350 W S6 15%
Idle speed n : ......................................2980 min
0
Grinding/sanding wheel ø: ...................... 150 mm
Brushing wheel ø: ................................... 150 mm
Grinding/sanding wheel thickness: ........... 20 mm
Grinding/sanding wheel hole ø: ................ 32 mm
Peripheral speed: ......................................35 m/s
Grinding/sanding wheel grit size (coarse): .... K36
Protection class : ................................................. I
Weight: .......................................... approx. 8.5 kg
Operating mode S6 15%: Continuous operation
with idling (cycle time 10 minutes). To ensure that
the motor does not become excessively hot, it
may only be operated for 15% of the cycle at the
specifi ed rating and must then be allowed to idle
for 85% of the cycle.
Danger!
Noise
The noise emission values were measured in ac-
cordance with EN 62841.
Operation
L sound pressure level ..................... 85.5 dB(A)
pA
K uncertainty ........................................ 3 dB(A)
pA
L sound power level ....................... 98.5 dB(A)
WA
K uncertainty ........................................ 3 dB(A)
WA
Wear ear-muff s.
The impact of noise can cause damage to hea-
ring.
- 18 -
-1
17.11.2022 14:36:44 17.11.2022 14:36:44