Description Of Symbols; Specification; General Safety - Silverline Rotary Laser Level Kit Handbuch

GB

Description of Symbols

The rating plate on your tool may show symbols. These represent important
information about the product or instructions on its use.
Wear hearing protection
Wear eye protection
Wear breathing protection
Wear head protection
Wear hand protection
Read instruction manual
Conforms to relevant legislation and safety standards
Environmental Protection
Waste electrical products should not be disposed of with
household waste. Please recycle where facilities exist. Check
with your local authority or retailer for recycling advice
LASER warning!

Specification

Input voltage: . . . . . . . . . . . . . . . . . . . . . . 6V, DC
Power:. . . . . . . . . . . . . . . . . . . . . . . .200-300mA
Battery type: . . . . . . . . . 4 x C-cell batteries, 1.5V
Laser class:. . . . . . . . . . . . . . . . . . . . . . . .Class II
Laser wavelength:. . . . . . . . . . . . . . . . . . 650nm
Laser output power: . . . . . . . . . . . . . . . . .<1mW
Laser working range:
Laser line: . . . . . . . . . . . . . . . . . . . . . .Max 10m
Laser dot: . . . . . . . . . . . . . . . . . . . . . . .Max 30m
Accuracy: . . . . . . . . . . . . . . . . . . . . . . 0.5mm/m
Tripod height: . . . . . . . . . . . . . . . . 540-1180mm
Standing
dimensions (WxLxH):. . . . . 720 x 600 x 1180mm
Ingress protection:. . . . . . . . . . . . . . . . . . . . .IP20
Weight: . . . . . . . . . . . . . . . . . . . . . . . . . . . .1.6kg
As part of our ongoing product development, specifications
of Silverline products may alter without notice.
4

General Safety

WARNING Read all safety warnings and all instructions.
Failure to follow the warnings and instructions may result in electric shock,
fire and/or serious injury.
WARNING: This device is not intended for use by persons (including
children) with reduced, physical or mental capabilities or lack of
experience or knowledge unless they have been given supervision or
instruction concerning use of the device by a person responsible for
their safety. Children must be supervised to ensure that they do not play
with the device. Save all warnings and instructions for future reference.
Work area safety
a) Do not operate electrical devices in explosive atmospheres,
such as in the presence of flammable liquids, gases or dust.
Electrical devices create sparks which may ignite the dust or fumes.
Electrical safety
a) Electrical plugs must match the outlet. Never modify the plug in
any way. Do not use any adapter plugs with earthed (grounded)
devices. Unmodified plugs and matching outlets will reduce risk of
electric shock.
b) Avoid body contact with earthed or grounded surfaces, such as
pipes, radiators, ranges and refrigerators. There is an increased risk
of electric shock if your body is earthed or grounded.
c) Do not expose non-waterproof electrical devices to rain or wet
conditions. Do not submerge non-pressure-rated devices in water.
Water entering an electrical device will increase the risk of electric shock.
d) Do not abuse the power lead. Never use the lead for carrying,
pulling or unplugging the device. Keep lead away from heat, oil,
sharp edges or moving parts. Damaged or entangled power leads
increase the risk of electric shock.
e) If operating an electrical device in a damp location is unavoidable,
use a residual current device (RCD) protected supply. Use of an RCD
reduces the risk of electric shock.
WARNING: When used in Australia or New Zealand, it is recommended that
devices are ALWAYS supplied via Residual Current Device (RCD) with a rated
residual current of 30mA or less.
Personal safety
a) Stay alert, watch what you are doing and use common sense when
operating an electrical device. Do not use potentially dangerous
electrical devices while you are tired or under the influence of
drugs, alcohol or medication. A moment of inattention while operating
potentially dangerous devices may result in serious personal injury.
b) Use personal protective equipment including eye protection where
appropriate. Protective equipment used for appropriate conditions will
reduce personal injuries.
c) Prevent unintentional starting. Ensure the switch is in the off-
position before connecting to a power source. Carrying electrical
devices with your finger on the switch or energising devices that have
the switch on invites accidents.
d) Do not overreach. Keep proper footing and balance at all times.
This enables better control of the device in unexpected situations.
Use and Care
a) Do not force the device. Use the correct device for your application.
The correct device will do the job better and safer at the rate for which it
was designed.
b) Do not use the electrical device if the switch does not turn it on and
off. Any device that cannot be controlled with the switch is dangerous
and must be repaired.
c) Disconnect the power source before making any adjustments,
changing accessories, or storing electrical devices. Such preventive
safety measures reduce the risk of starting the device accidentally.
d) Store idle devices out of the reach of children and do not allow
persons unfamiliar with the device or these instructions to operate
it. Electrical devices may be dangerous in the hands of untrained users.