Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
ENGLISH
•
Check that the unit is free of dust and dirt.
•
Do not use aggressive cleaning agents and keep the device
away from moisture.
Semi-annual maintenance
•
Inspect all nuts and bolts on the moving parts of the machine.
Tighten bolts and nuts as necessary and appropriate.
•
Remove dust from the treadmill. Switch off the treadmill and
remove the power supply. Carefully remove the cover and wipe
off any dust and dirt with a soft cloth or use a (hand) hoover if
necessary. Replace the cover and turn the power back on.
We recommend the following:
•
Clean the unit after use.
•
Use a dry cloth to clean the control panel and the areas around
the on/off switch.
•
Use a soft, clean cloth and detergent to remove stubborn marks
and dirt from the unit.
•
Store the unit in a safe, dry place away from heat and water.
CAUTION!
•
Repairs must be carried out by a professional technician,
unless otherwise specified by the supplier or manufacturer.
•
To avoid slipping during exercise, the treadmill belt should
not be too loose. To avoid abrasion between the roller and
the treadmill and to ensure proper operation of the machine,
the treadmill should not be too tight. The distance between
the step and the belt can be adjusted. The distance between
the step and the belt should be 50 to 75 mm on both sides.
Cleaning
General cleaning of the unit will extend its life. Keep the appliance
clean by dusting it regularly. Regular maintenance will prolong the life
of your appliance and prevent injuries! For more information, please
visit https://www.virtufit.nl/service/faq/
CAUTION!
Wear clean shoes to reduce the risk of soiling the
machine. At least once a year, remove the cover to remove dust.
LUBRICATING THE TREADMILL
The treadmill is equipped with a pre-lubricated coating that requires
little maintenance. Wear and tear of the treadmill plays an important
role in the function and durability of the treadmill and should therefore
be lubricated periodically. We recommend that you check the treadmill
regularly.
Recommended lubrication of the treadmill
The treadmill displays a message on the screen when 300 km have
been covered. This is an automated reminder from the system that the
treadmill needs to be lubricated.
Instruction
•
Lift the treadmill and clean it with a damp cloth to remove
dirt and dust.
Totally Foldable TR-50i Loopband
•
Apply a small amount of silicone oil under the treadmill. To
do this, use a silicone spray bottle or drip two or three drops of
Gebruiksaanwijzing
silicone oil along the length of the belt. Do this on both sides of
the treadmill.
•
Turn on the treadmill and let it run for three minutes
without standing on it. This ensures that the silicone oil is
properly distributed on the belt and that excess oil is removed.
•
Check the condition of the treadmill regularly and reapply
silicone oil if necessary. Make sure that the belt is clean and dry
before riding on it.
CAUTION!
Regular maintenance will prolong the durability of the
Voor vragen of ontbrekende onderdelen kunt u contact opnemen met Fitness Benelux:
treadmill and prevent injury!
TROUBLESHOOTING
There is no signal when the power supply is connected
Check that the cables to the console are connected correctly. Make
sure that all cables are securely fastened. The aluminium ends of the
console cables are very sensitive and should be kept straight. If the
console issues an error message, the aluminium ends of the cable may
be tilted. Straighten the aluminium ends, which may resolve the error
message.
No power: Check that the adapter and cables are properly connected.
T
+31 (0)74-7600219
E
ser
W
NL
14
Werbung
Inhaltsverzeichnis
